View JUA1117AS-TR_9003584.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

jua1117as - tr page : 1 outer dimension 2.4 x 1.85 x 0.6mm ( l x w x h ) standard product reference sheet features recommended applications package product features ? thinner package, orange color emitting led ? lead C free soldering compatible ? rohs compliant ? amusement equipment, home appliances, oa/fa equipment, other general lighting use, etc. 2018.4.5
jua1117as - tr page : 2 unit :mm weight :5.2mg tolerance : 0.1mm outline dimensions recommended pad unit mm 2018.4.5 no. part name remarks qty. led die algainp 1 lamp housing glass fabric 1 terminal au plating 2 encapsulant silicone resin 1
jua1117as - tr page : 3 specifications 2018.4.5 260 ma operating temperature soldering temperature "reflow soldering" electrostatic discharge threshold "hbm" 1,000 v -40 +100 note 1 note 2 i f derate linearly from "60 " esd testing method : eiaj4701/300(304) human body model(hbm) 1.5k,100pf please refer to the attached sheets, soldering conditions. i frm 100 t opr reverse voltage v r 5 i f 30 ma i frm 2.5 ma/ 87 repetitive peak forward current "1ms,1/20duty" (ta=25 ) milky white algainp orange product overview resin color( emitting area) power dissipation p d i frm derate linearly from "60 " die material emitting color absolute maximum ratings note2 item symbol maximum ratings units mw esd storage temperature t stg -40 +85 note1 forward current v t sld i f 0.75 ma/
jua1117as - tr page : 4 specifications notes ? tolerance of each r ank: i v 10% , d 1nm ? above the table of luminous intensity (i v ) and dominant wavelength (d) values are the setup value of the selection machine. 2018.4.5 note5 viewing angle at 50% iv, ?x ; housing long side axis, ?y ; housing short side axis reverse current i r v r =5v - - note4 - - 120 - 605 1,500 - forward voltage ?y 330 dominant wavelength ?x 120 i f = 20ma units electro and optical characteristics v v f 2.7 (ta=25 ) i f = 20ma - 600 i f = 20ma i f = 20ma lm 597 612 i v item symbol conditions typ. max. 2.1 100 a 1.7 v nm luminous intensity luminous flux 1.8 - d mcd min. note3,4 please refer to the following sorting charts. note3 note5 half intensity angle i f = 20ma deg. sorting for luminous intensity and dominant wavelength d (nm) leds shall be sorted out into the following ranks. 300 min. min. cd max. max. rank condition 470 680 i f =20ma ta=25 612 597 a i f =20ma ta=25 da 1,000 1,500 i v (mcd) cf 680 1,000 ce 470 rank condition
jua1117as - tr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 380 430 480 530 580 630 680 730 780 0 50 100 -100 -50 0 50 100 - 30 - 60 - 90 60 30 0 90 spatial distribution conditions: ta = 25 , i f =20ma relative intensity : (%) page : 5 wavelength vs. relative intensity conditions: ta = 25 , i f =20ma wavelength: (nm ) relative intensity technical data x direction y direction 2018.4.5
jua1117as - tr 0.1 1.0 10.0 -40 -20 0 20 40 60 80 100 0.0 0.5 1.0 1.5 2.0 0 10 20 30 40 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 -40 -20 0 20 40 60 80 100 1 10 100 1.0 1.5 2.0 2.5 3.0 page : 6 forward voltage vs. forward current condition : ta = 25 forward voltage : v f (v ) forward current : i f (ma ) forward current vs. relative intensity condition : ta = 25 forward current: i f ( ma) relative intensity ambient temperature vs. relative intensity condition : i f = 20ma ambient temp. : ta ( ) technical data relative intensity ambient temperature vs. forward voltage condition : i f = 20ma ambient temp. : ta ( ) forward voltage: v f (v) 2018.4.5
jua1117as - tr 1 10 100 1 10 100 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 duty=5% duty=10% duty=20% duty=50% 0 10 20 30 40 50 60 -40 -20 0 20 40 60 80 dc 0 20 40 60 80 100 -40 -20 0 20 40 60 80 duty ratio vs. max . forward current condition: ta = 25 duty ratio: (%) ambient temperature vs. maximum forward current repetition frequency : f R 50hz ambient temp. : ta( ) page : 7 ambient temperature vs. maximum forward current ambient temp. : ta( ) technical data forward current : i f max. (ma) power dissipation pd (mw) ambient temperature vs. power dissipation ambient temp. : ta( ) forward current : i f max. (ma) forward current : i f max. (ma) 2018.4.5
jua1117as - tr 1 10 1.0 10.0 100.0 1,000.0 10,000.0 100,000.0 50hz 100hz 1khz 10khz page : 8 technical data i f peak max./ i f dc max. pulse width vs. maximum tolerable peak current condition : ta=25 pulse width : tw (s) 2018.4.5
jua1117as - tr page : 9 soldering condition 1. heat stress during soldering will influence the reliability of leds, however that effect will vary on heating method. also, if components of varying shape are soldered together, it is recommended to set the soldering pad temperature according to the component most vulnerable to heat (e.g., surface mount led). 2. led parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials . 3. recommended temperature profile for the reflow soldering is listed as the temperature of the resin surface. temperature distribution varies on heating method, pcb material, other components in the assembly, and mounting density. please do not repeat the heating process in reflow process more than twice. note 1 recommended temperature profile for the reflow soldering is listed as the temperature of the resin surface. this should be the maximum temperature for soldering. lowering the heating temperature and decreasing heating time is very effective in achieving higher reliability . note 2 the reflow soldering process should be done up to twice(2 times max). when second process is performed, interval between first and second process should be as short as possible to prevent absorption of moisture to resin of led. the second soldering process should not be done until leds have returned to room temperature (by nature - cooling) after first soldering process. soldering precaution ( acc.to eiaj - 4701/300 ) page : 9 2018.4.5 recommended reflow soldering condition 40sec max. 150 180 +1.5 +5 /s 260 max. - 1.5 - 5 /s 90~ 120sec max. pre - heating (soldering 230 max. peak temperature
jua1117as - tr page : 10 soldering condition 4. if soldering manually, stanley recommends using a soldering iron equipped with temperature control. during the actual soldering process , make sure that the soldering iron never touches the led itself, and avoid the led's electrode heating temperature reaching above the heating temperature of the solder pad. all repairs must be performed only once in the same spot, and please avoid reusing components. 5. in soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the appropriate temperature before using. also, please avoid applying any types of pressure to the soldered components before the solder has been cooled and hardened, as it may deteriorate solder performance and solder quality. 6. when using adhesive material for tentative fixatives, thermosetting resin or ultraviolet radiation (uv) setting resin with heat shall be recommended . the curing condition, temperature:150 max./time:120sec.max. 7. flow soldering (dip soldering) is not recommended for this product . 8. lsopropyl alcohol is recommended for cleaning. some chemicals, including freon substitute detergent could corrode the lens or the casing surface, which cause discoloration, cloud, crack and so on. please review the reference chart below for cleaning. if water is used to clean (including the final cleaning process), please use pure water (not tap water), and completely dry the component before using. recommended manual soldering condition temperature of iron tip 350 max. soldering duration, time 3sec.max.,1 time page : 10 cleaning agents recommended / not recommended isopropyl alcohol ? recommended trichloroethylene x not r ecommended chlorothene x not r ecommended acetone x not r ecommended thinner x not r ecommended 2018.4.5
jua1117as - tr page : 11 handling precaution this kind of led lamp is highly sensitive to surge voltage generated by the on/off status change and discharges of static electricity through frictions with synthetic materials, which may cause severe damage to the die or undermine its reliability. damaged products may experience conditions such as extremely high reverse voltage, or a decrease of forward rise voltage, deteriorating its optical characteristic. stanley products are designed to withstand up to 1,000v under the eiaj ed - 4701/300 test ? 304 (hbm), and are packed with anti - static components. however, the following precautions and measures are vital in ensuring product quality during shipment. eiaj ed - 4701/300 304/hbm electrification model: c=100pf, r2=1.5k do not place electrified non - conductive materials near the led product. avoid led products from coming into contact with metallic materials.( should the metallic material be electrified , the sudden surge voltage will most likely damage the product .) avoid a working process which may cause the led product to rub against other materials . install ground wires for any equipment, where they can be installed, with measures to avoid static electricity surges . prepare a esd protective area by placing a conductive mattress (1m max.) and ionizer to remove any static electricity. operators should wear a protective wrist - strap. operators should wear conductive work - clothes and shoes. to handle the products directly, stanley recommends the use of ceramic, and not metallic, tweezers. 2. working environment a dry environment is more likely to cause static electricity. although a dry environment is ideal for storage state of led products, stanley recommends an environment with approximately 50% humidity after the soldering process. recommended static electricity level in the working environment is 150v, which is the same value as integrated circuits (which are sensitive to static electricity). for electric static discharge ( esd) 1. electrification/static electricity protection stanley recommends the following precautions in order to avoid product (die) damage from static electricity , when an operator and other materials electrified by friction coming in contact with the product. page : 11 2018.4.5
jua1117as - tr page : 12 handling precaution other precautions 1. stanley led lamps have semiconductor characteristics and are designed to ensure high reliability. however, the performance may vary depending on usage conditions 2. absolute maximum ratings are set to prevent led lamps from failing due to excess stress ( temperature , current, voltage, etc .). usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum ratings simultaneously . 3. in order to ensure high reliability from led lamps, variable factors that arise in actual usage conditions should be taken into account for designing. ( derating of typ., max forward voltage, etc.) 4. please insert protective resistors into the circuit in order to stabilize led operation and to prevent the device from igniting due to excess current . 5. please avoid the stick of foreign material because molding resin in the products have adhesiveness. also please don't touch lens portion. 6. please check the actual performance in the assembly because the specification sheets are described for led device only. 7. please refrain from looking directly at the light source of led at high output, as it may harm your vision. 8. the products are designed to operate without failure in recommended usage conditions. however, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise . 9. the products are manufactured to be used for ordinary electronic equipment. please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on). 10. when there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). please make sure there is no problem before using . 11. the formal specification sheets shall be valid only by exchange of documents signed by both parties. page : 12 2018.4.5
jua1117as - tr page : 13 1. picking up point with nozzle: lamp housing of the product ( area) ( shown below) recommendation the picking up point should be within lamp housing portion, because the silicone resin used for the lens is soft. (if the nozzle makes contact with the lens, the products might be destroyed) handling precaution handling precautions for product mounting please adjust the load, the pick up point, the nozzle diameter, etc. before mounting because the over load can cause the breakage of the lamp housing. page : 13 2018.4.5
jua1117as - tr page : 14 packaging specifications this product is baked (moisture removal) before packaging, and is shipped in moisture - proof packaging (as shown below) to minimize moisture absorption during transportation and storage. however, with regard to storing the products, stanley recommends the use of dry - box under the following conditions is recommended. moisture - proof bag as the packaging is made of anti - static material but packaging box is not. the package should not be opened until immediately prior to its use, and please keep the time frame between package opening and soldering which is maximum 72h . if the device needs to be soldered twice, both soldering operations must be completed within the 3days(72h). if any components should remain unused, please reseal the package and store them under the conditions described in the recommended storage condition above . this product must be required to perform baking process (moisture removal) for at 48h( min.). 72 h (max .) at 60 5 degrees celsius if following conditions apply. 1. in the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its blue color. 2 . in the case of time passes for 72h after the package is opened once . baking process should be performed after led having been taken out of the package . baking may be performed in the tape - reel form , however if it is performed with the reel stacked over one another, it may cause deformation of the reels and taping materials and later obstruct mounting. please handle only once it has returned to room temperature. provided that, baking process shall be 2 times max. time elapsed after package opening page : 14 in the case of the package unopened , 6 months under recommended storage condition . please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. recommended storage condition / products warranty period temperature +5 30 humidity under 70% 2018.4.5
jua1117as - tr page : 15 packaging specification moisture - proof packaging specification fastener for re - storage after opening bag customer's opening position product label (desiccant with indicator for moisture level is enclosed .) a page : 15 heat sealing position (after product being put in) allowable leaving time means the maximum allowable leaving time after opening package, which depends on each led type. the allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. when judging if the allowable leaving time has exceeded or not, please subtract the soldering time. the allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. flow chart - package opening to mounting 2018.4.5 no. part name matelrial remarks moisture-proof bag with aluminum layer pet+al+pe with esd protection yes no yes no yes no baking led under recommended condition product mounting unused-product remained return to moisture-proof package and seal finished reopen the moisture-proof package flow chartpackage opening to mounting stored under recommended condition moisture-proof package first time opening allowable leaving time exceeded (*) discoloration of silica gel
jua1117as - tr page : 16 packing box ( rohs ? elv compliant) the above measure is all the reference value. the box is selected out of the above table by shipping quantity. packaging specifications b type a material / box cardboard c5bf type b,c material / box cardboard k5af partition cardboard k5af box type outline dimension l w h (mm) capacity of the box type a 280 265 45 3 reels type b 310 235 265 15 reels type c 440 310 265 30 reels page : 16 2018.4.5
jua1117as - tr page : 17 label specification ( acc.to jis - x0503(code - 39 ) product label a. parts number b . bar - code for parts number c. parts code (in - house identification code for each parts number) d. packed parts quantity e . bar - code for packed parts quantity f. lot number & rank (refer to lot number notational system for details ) g. bar - code for lot number & rank opto device label a. customer name b. parts type c. parts code d. parts number e. packed parts quantity f. carton number g. shipping date h. bar - code for in - house identification number bar - code font : acc.to code - 39(jis - x0503 ) packaging specifications b a page : 17 2018.4.5
jua1117as - tr page : 18 taping and reel specifications (acc.to jis - c0806 - 03 appearance note " - tr" means cathode s ide of leds should be placed on the sprocket - hole side. items specifications remarks leader area cover - tape cover - tape shall be longer than 320mm without carrier - tape the end of cover - tape shall be held with adhesive tape. carrier - tape empty pocket shall be more than 25 pieces. please refer to the above figure for taping & reel orientation . trailer area empty pocket shall be more than 40 pieces. the end of taping shall be inserted into a slit of the hub. page : 18 2018.4.5
jua1117as - tr page : 19 taping and reel specifications ( acc.to jis - c0806 - 03 qty. per reel mechanical strength others 4 ,000parts/reel minimum qty. per reel might be 500 parts when getting less than 4,000 parts. in such case, parts of 500 - unit - qty. shall be packed in a reel and the qty . shall be identified on the label. cover - tape adhesive strength shall be 0.1 1.0n ( an angle between carrier - tape and cover - tape shall be170 deg. ) both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. reversed - orientation, up - side down placing, side placing and out of spec. parts mixing shall not be held. max. qty. of empty pocket per reel shall be defined as follows. page : 19 2018.4.5 remarks 2,500 500 - qty./reel max.qty. of empty pocket 1,500 - 1 1 - 2,000 no continuance no continuance 1 2 1,000 4,000 4 no continuance 2 no continuance 3,000 3 no continuance 3,500 3
jua1117as - tr taping dimensions reel dimensions page : 20 taping and reel specifications ( acc.to jis - c0806 - 03 unit mm page : 20 2018.4.5 no. part name remarks carrier-tape with esd protection cover-tape with esd protection with esd protection carrier-reel
jua1117as - tr page : 21 lot number notational system - 1digit production location (mark identify alphabet) - 1digit production year (last digit of production year 20099,20100,20111, ??? ) - 2digits production month (jan. to sep. , should be 01,02,03, ????? ) - 2digits production date - 3digits serial number - 2digits tape and reel following number - 2digits luminous intensity rank. (if luminous intensity rank is 1 digit, " - " shall be dashed on the place for the second digit. if there is no identified intensity rank, " - - " is used to indicate .) - 2digits chromaticity rank ( if chromaticity rank is 1 digit, " - " shall be dashed on the place for the second digit. if there is no identified intensity rank, " - - " is used to indicate.) - 1digit option rank ( stanley normally print " - " to indicate) page : 21 2018.4.5
jua1117as - tr page : 22 correspondence to rohs ? elv instruction page : 22 this product is in compliance with rohs ? elv. prohibition substance and it's criteria value of rohs ? elv are as follows. ? rohs instruction refer to following (1) (6). ? elv instruction . refer to following (1) (4). substance group name criteria value (1) lead and its compounds 1,000ppm max (2) cadmium and its compounds 100ppm max (3) mercury and its compounds 1,000ppm max (4) hexavalent chromium 1,000ppm max (5) pbb 1,000ppm max (6) pbde 1,000ppm max page : 22 2018.4.5
jua1117as - tr reliability testing result 1. reliability testing result 2. failure criteria item symbol condition failure criteria luminous intensity i v i f =20ma testing min. value standard min. value 0.5 forward voltage v f i f =20ma testing max. value R standard max. value 1.2 reverse current i r v r =5v testing max. value R standard max. value 2.5 cosmetic appearance - - notable discoloration, deformation and cracking reference test page : 23 test item criteria test condition duration failure operating life eiaj ed - 4701 /100(101) ta=25 maximum rated current 1,000h 0 /20 high temperature operating life eiaj ed - 4701 /100(101) ta=85 maximum rated current ( ) 1,000h 0 /20 low temperature operating life eiaj ed - 4701 /100(101) ta= - 40 maximum rated current 1,000h 0 /20 wet high temperature operating life eiaj ed - 4701 /100(102) ta=60 rh=90% maximum rated current 1,000h 0 /20 thermal shock eiaj ed - 4701 /100(105) ta= tstg max. tstg min. (each 15min) 200 cycles 0 /20 resistance to reflow soldering eiaj ed - 4701 /300(301) moisture soak 30 70% 72h preheating 150 180 90 120sec. soldering 260 max 2 times 0 /20 electric static discharge ( esd) eiaj ed - 4701 /300(304) c=100pf r2=1.5k 1 , 000 v once of each polarity 0 / 10 2018.4.5
jua1117as - tr special notice to customers using the products and technical information shown in this data sheet 1) the technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. it does not constitute the warranting of industrial property nor the granting of any license. 2) for the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. therefore it is recommended that the most updated specifications be used in your design. 3) when using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. we are not responsible for any damage which may occur if these specifications are exceeded. 4 ) the products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (oa equipment, telecommunications equipment, av machine, home appliance and measuring instrument). the application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except oa equipment, telecommunications equipment, av machine , home appliance and measuring instrument. 5) in order to export the products or technologies described in this data sheet which are under the foreign exchange and foreign trade control law, it is necessary to first obtain an export permit from the japanese government. 6) no part of this data sheet may be reprinted or reproduced without prior written permission from stanley electric co., ltd. 7) the most updated edition of this data sheet can be obtained from the address below: http:// www.stanley - components.com/en/ page : 24 2018.4.5

▲Up To Search▲

Price & Availability of JUA1117AS-TR

	To Download JUA1117AS-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .